Other Hardware

1:12 Scale - Metal - Approximate height of tap 10mm = 3/8 inch..

1:12 Scale - Wood & Metal - approximate length 15mm - 18/32 inch..

1:12 Scale - Metal- Comes as 3 pieces, latch, receiver and bolt - Latch width 18mm = 11/16 inches..

1:12 Scale - Plastic - Approximate height 10mm = 3/8 inch..

1:12 Scale - Plastic - Approximate height 10mm = 3/8 inch..

1:12 Scale - Wood & Metal - approximate height 16mm - 0.5/8 inches..

1:12 Scale - Plastic - Approximate height 24mm = 0.15/16 inches..

1:12 Scale - Metal - Pack of 4 - Approximately 22mm long = 7/8 inches..

1:12 Scale - Metal - 6 sets of key plate key & nails - Approximate length of key 15mm = 9/16 inches..

1:12 Scale - Brass - Pack of 12 - Approximate width 2mm..

1:12 Scale - Metal - Approximate height 13mm = 1/2 inch..

5 pairs of magnetic discs approximately 1cm diameter x 1mm thick - to part the magnets please slide apart. These magnetic discs can be used to hold battery lights, pictures or other miniatures in place. Glue one magnet to the wall or ceiling where you wish to attach your light or picture and glue th..

1:12 Scale - Metal - width 20mm - height 55mm = 3/4 x 1 inches..

1:12 Scale - Metal - width 20mm - height 55mm = 3/4 x 1 inches..

1:12 Scale - Metal- Approximate height 60mm = 2.3/8 inches..

1:12 Scale - Metal - length 22mm - 0.86 inches..

1:12 Scale - Wooden - Pack of 2 - 34mm = 1.3/8 inches Long..

1:12 Scale - Wooden - Pack of 6 - 34mm = 1.3/8 inches Long..

1:12 Scale - Metal - length 120mm to 210mm - 4.3/4 inches to 8.1/4 inches..

1:12 Scale - Natural Wood - Length 55mm - 2.3/16 inches..

1:12 Scale - Metal - height 16mm = 5/8 inches..

1:12 Scale - Plastic - width 21mm = 13/16 inches..

1:12 Scale - Plastic - width 15mm = 5/8 inches..