Dolls House Lighting Accessories

Spare red bulb for all Glow Well Fires. Rated at 12v 50ma. Approximate Wire length 260mm = 10.1/4 inches Approximate Bulb length 7mm x width 3mm = 1/4 x 1/8 inch...

Single Copper Tape - 108 foot x 3/16" reel - For use with 12v Lighting Systems..

U.S./Canadian Transformers Powers up to 130 micro bulbs or 55 1.5V GOR bulbs These transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan. Cir-Kit plug-in transformers provide a safe and convenient power ..

Double Copper Tape - 30 Foot Reel - For use with 12v Lighting Systems..

Double Copper Tape - 15 Foot Reel - For use with 12v Lighting Systems..

Approximate length 225mm = 8.15/16 inches..

Pack of 4 rated at 12 v 65maThe dimensions of the bulb are the approximate length of 12mm = 1/2 inch..

1:12 Scale - Plater/resin - Approximate width 75mm = 3 inches..

Miniature Lighting Accessory - Test probe for use with tape wire dolls house lighting systems. Use during installation to detect breaks in tape wiring, to eliminate shorts and to test transformer etc...

3 socket extension for use with battery - Approximate length of wire 140mm = 5.1/2 inches ..

For use with LED Lights - 3 socket extension - Approximate length of wire 60cm = 2.3/8 inches ..

For use with LED Lights - 12 socket extension - Approximate length of wire 60cm = 2.3/8 inches - Comes with with switch and fuse..

For use with LED Lights - 6 socket extension - Approximate length of wire 60cm = 2.3/8 inches - Comes with with switch and fuse..

1:12 Scale - Metal - Approximate width 105mm = 4.1/8 inches..

1:12 Scale - Metal - Approximate width 116mm = 4.9/16 inches..

Pack of 2..

U.K Transformers Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug directly into a powered outlet, thus eliminating the need of building a special transformer enclosure within the doll..

Power Strip Lighting Kit - 12 extension leads, 2 Triple Extension leads, 1 Power strip with Fuse & Spare fuse, for use with a 12V transformer...

Pack of 4 - The dimensions of the bulb are approximately 3mm with the length of 16mm. ..

Spare flicker flame bulbs for use with dolls house fires..

To be used with a Socket Power strip..

Spare Fuse for Socket Strip..

European transformer Output 12V..

Replacement bulb for New England Lighthouse..

Miniature Lighting Accessory - 32 Gauge - 2 Conductor Wire - Approximate length 50' = 15M..

A 12V Lighting Socket Strip for use with dolls house lights. Comes complete with:Fuse, On / Off switch and indicator bulb.The indicator light on these strips is a 'blown fuse' indicator.The light should be off, if it lights it is probable that the fuse has blown, possibly due to a short-circuit..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.UL approved. Output: 1300ma, 12V, 16W illuminates up to 10-21 65ma bulbs. Recommended for use with 10 or more bulb..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

U.S./Canadian Transformers CK1009D(UL)Cir-Kit table top transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug into a powered outlet, thus eliminating the need of building a special transformer enclosu..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

1:12 Scale - Ceramic - Approximate width 58mm = 2.1/4"..