Dolls House Lighting Accessories

Double Copper Tape - 30 Foot Reel - For use with 12v Lighting Systems..

Double Copper Tape - 15 Foot Reel - For use with 12v Lighting Systems..

Approximate Length 507 mm width 2mm depth 2mm = 20 inches x 1/16 inch x 1/16 inch..

Approximate length 225mm = 8.15/16 inches..

Pack of 4 Bi Pin bulbs..

Pack of 2 rated at 12 v 65ma - Approximate length of bulb 16mm = 5/8 inch -Comes with wire & plug - Approximate length of wire 610mm = 24 inches..

1:12 Scale - Plater/resin - Approximate width 75mm = 3 inches..

Miniature Lighting Accessory - Test probe for use with tape wire dolls house lighting systems. Use during installation to detect breaks in tape wiring, to eliminate shorts and to test transformer etc...

3 socket extension for use with battery - Approximate length of wire 140mm = 5.1/2 inches ..

For use with LED Lights - 3 socket extension - Approximate length of wire 60cm = 2.3/8 inches ..

For use with LED Lights - 6 socket extension - Approximate length of wire 60cm = 2.3/8 inches - Comes with with switch and fuse..

1:12 Scale - Metal - Approximate width 105mm = 4.1/8 inches..

1:12 Scale - Metal - Approximate width 116mm = 4.9/16 inches..

Pack of 2..

U.K Transformers Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug directly into a powered outlet, thus eliminating the need of building a special transformer enclosure within the doll..

Power Strip Lighting Kit - 12 extension leads, 2 Triple Extension leads, 1 Power strip with Fuse & Spare fuse, for use with a 12V transformer...

Pack of 4 - The dimensions of the bulb are approximately 3mm with the length of 16mm. ..

Spare flicker flame bulbs for use with dolls house fires..

To be used with a Socket Power strip..

Spare Fuse for Socket Strip..

European transformer Output 12V..

Replacement bulb for New England Lighthouse..

Miniature Lighting Accessory - 32 Gauge - 2 Conductor Wire - Approximate length 50' = 15M..

A 12V Lighting Socket Strip for use with dolls house lights. Comes complete with:Fuse, On / Off switch and indicator bulb.The indicator light on these strips is a 'blown fuse' indicator.The light should be off, if it lights it is probable that the fuse has blown, possibly due to a short-circuit..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.UL approved. Output: 1300ma, 12V, 16W illuminates up to 10-21 65ma bulbs. Recommended for use with 10 or more bulb..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

U.S./Canadian Transformers CK1009D(UL)Cir-Kit table top transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug into a powered outlet, thus eliminating the need of building a special transformer enclosu..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All C..

1:12 Scale - Ceramic - Approximate width 58mm = 2.1/4"..

1:12 Scale - Ceramic - Approximate width 85mm = 3.5/16"..

1:12 Scale - Pack of 4 bulbs - Approximate length 23mm = 7/8 inches..

Lighting Kit - 1 Power strip with Fuse & Spare fuse, 8 extension leads, 2 Triple Extension leads - for use with a 12V transformer...

1:12 Scale - Pack of 4 bulb holders & bulbs..

Cir- Kit Junction Splice ..