Hardware

1:12 Scale - Metal - Pack of 2 - Approximate length 26mm = 1.1/32 inches..

1:12 Scale - Metal - Pack of 2 with Nails - Approximately 40mm long end to end and 7mm deep = 1.9/16 x 19/32 inches..

1:12 Scale - Metal - Pack of 2 with 6 Nails - Approximately 17mm long end to end and 12mm wide...

1:12 Scale - Metal - Set of 2 - Approximate width 8mm = 5/16 inch..

1:12 Scale - Wood & Metal - approximate length 15mm - 18/32 inch..

1:12 Scale - Metal - 2 Handles with 2 Keys - Approximate Length 23mm - 29/32 inch..

1:12 Scale - Metal - 2 Handles with 2 Keys - Approximate Length 23mm - 29/32 inch..

1:12 Scale - Brass - Pack of 26 - Approximately 6mm long..

1:12 Scale - Metal- Comes as 3 pieces, latch, receiver and bolt - Latch width 18mm = 11/16 inches..

1:12 Scale - Metal - Approximate length 15mm = 18/32 inch..

1:12 Scale - Metal - Approximate length 13mm = 1/2 inch..

1:12 Scale - Metal - Set of 2 - Approximate height 7mm = 9/32 inch..

1:12 Scale - Metal - Set of 2 - Fixed handles - Approximate height 8mm = 5/16 inch..

1:12 Scale - Metal - Approximate length 9mm = 3/8 inches..

1:12 Scale - Metal - Approximate length 16mm - 3/4 inches..

1:12 Scale - Gold Plated Metal - Pack of 2 - Approximate Length 16mm - 5/8 inches - Almost a flat back..

1:12 Scale - Plastic - Approximate height 10mm = 3/8 inch..

1:12 Scale - Plastic - Approximate height 10mm = 3/8 inch..

1:12 scale - Metal - Non Working Decorative Set of 5 - Approximate length of hinge 37mm = 1.7/16 inches..

1:12 scale - Metal - Non Working Decorative Set of 5 - Approximate length of hinge 27mm = 1.1/16 inches..

100 pack of Brads perfect for your dolls house. 1/4 inches = 6mm in length..

1:12 Scale - Pack of 6 - Metal - Approximately 5mm = 1/4 inches wide..

1:12 Scale - Pack of 6 - Metal - Approximately 4mm = 0.5/32 inches wide..

1:12 Scale - Wood & Metal - approximate height 16mm - 0.5/8 inches..

1:12 Scale - Plastic - Approximate Height 4mm - 5/32 inches ..

1:12 Scale - Plastic - Approximate Height 4mm - 5/32 inches ..

1:12 Scale - Metal -Handle does lift - 19mm high = 0.3/4 inches ..

1:12 Scale - Metal - Pack of 4 - Approximately 22mm long = 7/8 inches..

1:12 Scale - Metal - 6 sets of key plate key & nails - Approximate length of key 15mm = 9/16 inches..

1:12 Scale - Gold plated brass - Pack of 4 - Approximately 22mm long = 7/8 inches..

1:12 Scale - Brass - Pack of 12 - Approximate width 2mm..

1:12 Scale - Brass - Pack of 20 - Approximately 4mm long..

1:12 Scale - Small Metal Knob & plate - Approximate width of plate 8mm = 5/16"..

5 pairs of magnetic discs approximately 1cm diameter x 1mm thick - to part the magnets please slide apart. These magnetic discs can be used to hold battery lights, pictures or other miniatures in place. Glue one magnet to the wall or ceiling where you wish to attach your light or picture and glue th..

1:12 Scale - Metal- Approximate height 60mm = 2.3/8 inches..

1:12 Scale - Metal - Pack of 2 - Approximate width 8mm = 5/16 inch..