Dolls House Hall Furniture

1:12 Scale - Metal - width 50mm - height 166mm = 2 inches x 6.1/2 inches..

1:12 Scale - Mini Mundus Kit - Approximate size 185mm x 50mm x 28mm = 7.1/4 x 2 x 1.1/8 inchesThis furniture kit contains unfinished precision machined wood parts and dial, pendulum, weights and hardware made of brass.Detailed assembly and finishing instructions are included. ..

1:12 Scale - Wooden - Approximate Length 125mm - Depth 35mm - Height 65mm = 4.7/8 x 1.3/8 x 2.1/2 inches ..

1:12 Scale - Wooden - Approximate width 40mm - depth 19mm - height 152mm - width 1.1/2 inches depth 3/4 inches height 6 inches..

1:12 Scale - Wooden - Approximate width 40mm - depth 19mm - height 152mm - width 1.1/2 inches depth 3/4 inches height 6 inches..

1:12 Scale - Wooden - Approximate Length 125mm - Depth 35mm - Height 65mm = 4.7/8 x 1.3/8 x 2.1/2 inches ..

1:12 Scale - Wooden - length 80mm - depth 32mm - height 65mm = 3.1/4 x 1.1/2 x 2.1/2 inches..

1:12 Scale - Wooden - Battery run - width 50mm - depth 32mm - height 165mm = 2 x 1.1/4 x 6.1/2 inches - To replace the battery pull out the clock face from the front...

1:12 Scale - Wooden - Battery run - width 50mm - depth 32mm - height 165mm = 2 x 1.1/4 x 6.1/2 inches - To replace the battery pull out the clock face from the front...

1:12 Scale Model Kit - Plastic Contains detailed and accurately scaled polystyrene miniatures of: Candlestand table, spoon rack with 4 teaspoons, Duxbury chair, school clock and packet of paint. Materials needed to complete these miniatures are: fast drying clear cement for plastic, paint brushes a..

1:12 Scale - JBM Furniture - Wooden - Battery run -Decorative long case clock in Gothic style. The clock face is set in a raised fame. The hood lifts off to enable the battery to be changed and a cupboard has been incorporated into the base of the clock. The clock measures 8 1/8 inches high x 2 7/8 ..

1:12 Scale - Wooden - Approximate Length 125mm - Depth 35mm - Height 65mm = 4.7/8 x 1.3/8 x 2.1/2 inches ..

1:12 Scale Model Kit - Plastic - Contains detailed and accurately scaled polystyrene miniatures of: Hall stand with mirror, parasol, umbrella, cane, derby, straw hat, newspaper and packet of paint - materials needed to complete these miniatures are: fast drying clear cement for plastic and a 3 or 4 ..

1:12 Scale - Metal - Width 55mm - Height 145mm = 2.1/8 x 5.3/4 inches..

1:12 Scale - Metal - Width 55mm - Height 145mm = 2.1/8 x 5.3/4 inches..

Fine Quality - Made by JBM - 1:12 Scale - Wooden - 1650 Arts and Crafts Hall stand with 3 coat hooks on either side of the oval mirror holder. Slats are used to form the back and sides of the seating section. Each side, attached under the chair arms by timber brackets are rods to hold umbrellas and ..

1:12 Scale - Wooden - Length 91mm - Height 76mm = 3.9/16 inches x 3 inches..

1:12 Scale - JBM Furniture - Wooden - Battery run - width 62mm - depth 32mm - height 178mm = 2.7/16" x 1.1/4" x 7"..

1:12 scale - Wooden - Doors open - width 42mm - depth 30mm - height 153mm = 1.5/8 inches x 1.1/8 inches x 6 inches..

1:12 Scale - Wooden - length 76mm - depth 35mm - height 65mm = 3 inches x 1.1/2 inches x 2.1/2 inches..

1:12 Scale - Wooden - length 76mm - depth 35mm - height 65mm = 3 inches x 1.1/2 inches x 2.1/2 inches..

1:12 Scale - Wooden - Length 91mm - Height 76mm = 3.9/16 inches x 3 inches..

1:12 Scale - Wooden - Drawer does open - Height of Table - 71mm - Width - 95mm = 2.13/16 inches x 3.3/4 inches..

1:12 Scale - Wooden - Drawer open - 3.3/4 inches x 1.3/4 inches x 2.3/4 incheswidth 94mm - depth 45mm - height 70mm..

1:12 Scale - Wooden - width 40mm - depth 18mm - height 160mm = 1.1/2 inches x 3/4 inches x 6.1/4 inches - Battery run working clock..

1:12 Scale - Drawer opens - Wooden - Mahogany with marble effect top - 70mm wide - 35mm deep - 80mm high = 2.3/4 inches x 1.3/8 inches x 3.1/8 inches..

1:12 scale - Wooden - Doors open - width 42mm - depth 30mm - height 153mm = 1.5/8 inches x 1.1/8 inches x 6 inches..