1:12 Scale During the 16th century, Spanish design was a unique blend of Renaissance and Moorish design. In this table or escritorio) we see how the two styles have been combined with a simple, square edged, plank table top and heavy carving on the table skirt and drawer fronts. Referred to as a l..
1:12 Scale The top of the (pupitre) writing table has an overhanging on all four sides and a very small moulded edge. The two drawers are fitted into the table apron and the drawer fronts are beaded. The table legs are scrolled legs and a scrolled stretcher joins the legs and meets under the bottom..
1:12 Scale - JBM Miniature Low four door cupboard supported on turned baluster legs with bun feet and scrolled, faux iron, stretchers. The bottom of the cabinet has a paneled frieze with entelac and patera carvings. The four large doors feature hand carved figures in a geometric chip carved frame..
1:12 Scale Carving was the main ornamentation of the Italian Renaissance furniture. Perfectly proportioned, exquisitely detailed, the legs on this cabinet are gun barrel turned and the carved ornament consists mainly of faceted lozenge shapes. The back legs are plain rectangular characteristic even..
Fine Quality - Made by JBM - 1:12 Scale - Wooden - English 1850 The tabletop has a moulded edge and the apron is serpentine shaped and fits between the legs of the table. The tops of the tapered legs are hand carved to match the carving on the apron.The table legs are fluted and joined diagonnaly b..
Fine Quality - Made by JBM - 1:12 Scale - Wooden - 1650 Arts and Crafts Hall stand with 3 coat hooks on either side of the oval mirror holder. Slats are used to form the back and sides of the seating section. Each side, attached under the chair arms by timber brackets are rods to hold umbrellas and ..
Fine Quality - Made by JBM - 1:12 Scale - French sleigh stool with shaped walnut frame around raised rolled sides. Carving on both sides of the frame and on the claw feet has been highlighted in gold. Original 16c design. The stool Measures 2 inches high from floor to top of scrolled timber sides, ..
1:24 Scale - Wooden and cane - Jacobean style with cane inserts and turned baluster legs. The cradle swings from the front and back spindles. The hood of the cradle is decorated with matching finals. The cradle measures 2 1/4 inches high to top of supporting post x 1 inch wide x 2 inches long = 57m..
1:12 Scale - JBM MiniatureWing chair walnut wood upholstered in black leather and studded.The arms and legs are scrolled and the spreader bars hand carved.Height 95mm = 3.3/4 inchesDetailed Scale Model For Adult Collectors..
1:12 Scale - JBM MiniatureSerpentine shaped desk top hand painted black with a Chinese style water scene in gold. The carving on the knees of the cabriole legs have been highlighted with gold. The bow fronts on the side drawers and the flat centre drawer have been illustrated in gold.Width 100mm - D..
1:12 Scale - JBM Miniatures - Victorian French Rococo style chaise lounge with rolled head rest and serpentine shaped arm rest. The hand carved cabriole legs have pad feet, the timber frame incorporates the sweeping style of Rococo which appeared in France about 1730. Walnut wood upholstered in a fa..
1:12 Scale - JBM Furniture - Wooden - Battery run -Decorative long case clock in Gothic style. The clock face is set in a raised fame. The hood lifts off to enable the battery to be changed and a cupboard has been incorporated into the base of the clock. The clock measures 8 1/8 inches high x 2 7/8 ..
1:12 Scale - JBM Miniatures - Wooden - Width 100mm - height 205mm = 4 x 8.1/16 inches George III English Chinese Chippendale breakfront china cabinet built on a stand. The stand has a serpentine shaped bottom shelf fitted between the spade shaped legs. The long front secretary drawer has a small re..
1:12 Scale - JBM Miniatures - Wooden - Width 129mm depth 61mm height 125mm = 5.1/16 x 2.1/4 x 5 inches French 19th-20th century Louis XV bombe shaped petit-bureau de dame (secretary) banded with a gilt rim. Six small drawers form the super structure of the desk. A small gilt decorated (non-working)..
1:12 Scale - JBM Miniatures - Approximate length 145mm = 5.3/4 inches Chaise lounge upholstered in black leather and buttoned. The timber sides are carved and studded. The front coil feet are plain and the back ones have small brass casters...