Dolls House Small Ornate T Hinges Antique Gold Miniature DIY Fittings Hardware

1:12 Scale - Metal - Pack of 2 with Nails - approximately 37mm long end to end and 13mm deep = 1.1/2 x 1/2 inches..

1:12 Scale - Brass - approximately 13mm long end to end and 8mm deep...

1:12 Scale - Metal - width 62mm - height 120mm = 2.3/8 inches x 4.3/4 inches..

1:12 Scale - Wooden - Pack of 12 - 3/16 inches wide - 2.5/8 inches high = 5mm wide - 67mm high..

1:12 Scale - Pottery - Approximate height 3mm = 1.3/16 inches..

1:12 Scale - Pack of 6 - Non working - Approximate length 15mm = 9/16 inches..

1:12 Scale - Metal - Approximate length 65mm = 2.1/2 inches..

1:12 Scale - Metal - Length 50mm = 2 inches..

1:12 Scale - Metal - Width 21mm = 7/8 inch..

1:12 Scale - Wooden - Approximate Length 122mm - Width 70mm = 4.13/16 inches x 2.3/4 inches..

1:12 Scale - Metal - Approximate width 40mm = 1.1/2 inches..

1:12 Scale - Metal - Approximate length of longest 55mm = 2.1/4 inches..

1:12 Scale - Metal - 6.3mm wide = 1/4 inches - 9.6mm long = 3/8 inches..

1:12 Scale - Embossed Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - British made - width 435mm - height 305mm = 17.1/8 inches x 12 inches..

1:12 Scale - Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Wooden - Approximate length 109mm = 4.1/4 inches..

1:12 Scale - Embossed Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - British made - width 435mm - height 305mm = 17.1/8 inches x 12 inches..

1:12 Scale - Paper - Length 44cm Height 30.5cm = 17.3/8 x 12 inches..

Plastic - 1:12 Scale - width 187mm - height 90mm = 7.3/8 inches x 3.1/2 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Hand made so size may vary a little approximately width 40mm - height 38mm = 1.9/16 inches x 1.1/2 inches..

1:12 Scale - Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Paper - Approximate width 415mm height 295mm = 16.1/4 inches x 11.5/8 inches..

Sheet of clear plastic 0.50mm thick - 297mm x 210mm = 11.5/8 inches x 8.1/4 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:24 Scale - Plastic - Opening door - Cut out size - width 35mm - height 86mm = 1.3/8 inches x 3.3/8 inches - This door is made from high quality inje..

1:12 Scale - width 43cm - height 30.5cm - 17 inches x 12 inches..