Dolls House Traditional Single Light Switch DIY Fittings Hardware 1:12 Accessory

1:12 Scale - Wooden - length 35mm - depth 21mm = 1.3/8 inches x 3/4 inches..

1:12 Scale - Gold Plated Brass - 8mm - 5/16 inches..

1:12 Scale - Genuine Hand Painted Porcelain Dolls - Soft wired body with porcelain lower limbs and head- Can be posed sitting down etc. - Height appro..

1:12 Scale - Porcelain doll - Fabric clothing - Comes with doll stand - Approximate Height 150mm - 6 inches..

1:12 Scale - Resin - Approximate length 63mm = 2.1/2 inches..

1:12 Scale - Soft wired body with porcelain lower limbs and head - Can be posed sitting down etc. - Height approximately 105mm = 4.1/8 inches - Comes ..

1:12 Scale - Metal - 6.3mm wide = 1/4 inches - 9.6mm long = 3/8 inches..

1:12 Scale - Embossed Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - British made - width 435mm - height 305mm = 17.1/8 inches x 12 inches..

1:12 Scale - Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Wooden - Approximate length 109mm = 4.1/4 inches..

1:12 Scale - Embossed Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - British made - width 435mm - height 305mm = 17.1/8 inches x 12 inches..

1:12 Scale - Paper - Length 44cm Height 30.5cm = 17.3/8 x 12 inches..

Plastic - 1:12 Scale - width 187mm - height 90mm = 7.3/8 inches x 3.1/2 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Hand made so size may vary a little approximately width 40mm - height 38mm = 1.9/16 inches x 1.1/2 inches..

1:12 Scale - Card - Approximate width 29.5 cm length 40 cm = 11.3/8 x 15.3/4 inches..

1:12 Scale - Paper - Approximate width 415mm height 295mm = 16.1/4 inches x 11.5/8 inches..

Sheet of clear plastic 0.50mm thick - 297mm x 210mm = 11.5/8 inches x 8.1/4 inches..

1:12 Scale - Gloss Card - Approximate width 29.5 cm length 40.5 cm = 11.3/8 x 15.3/4 inches..

1:24 Scale - Plastic - Opening door - Cut out size - width 35mm - height 86mm = 1.3/8 inches x 3.3/8 inches - This door is made from high quality inje..

1:12 Scale - width 43cm - height 30.5cm - 17 inches x 12 inches..