All Products

1:12 Scale - each sheet is width 45cm - height 10cm = 18 x 4 inches - Makes a 122cm x 2.5 cm Border = 48 x 1 inch..

1:12 Scale - 5 piece set - Length 42mm = 1.5/8 inches..

1:12 Scale - Rubber - height 34mm - 1.1/2 inches..

1:12 Scale - Flat Pack Kit - Made from Baltic birch plywood in 1/4 inch all parts are cut to fit. Made in the U.S.A. - Easily assembled - Many detailed features - Unpainted   The Lansdowne one car garage/workshop Features one large (24cm x 17.7cm = 9.5 x 7 inches) working garage door. Working side a..

1:12 Scale - Metal - height 32mm - 1.1/4 inches..

1:12 Scale - Metal - width 22mm - height 28mm = 7/8 inches x 1.1/8 inches..

1:12 Scale - Metal - width 22mm - height 28mm = 7/8 inches x 1.1/8 inches..

1:12 scale - Plastic - Tallest 33mm = 1.1/4 inches..

1:12 scale - Plastic - Tallest 35mm = 1.3/8 inches..

1:12 scale - Plastic - Tallest 25mm = 1 inches..

1:12 Scale - metal - height 135mm - 5.1/4 inches..

1:12 Scale - Paper - width 45cm - height 29cm = 17 inches x 11.3/8 inches..

1:12 Scale - Paper - width 45cm - height 29cm = 17 inches x 11.3/8 inches..

These items are 1:12 Scale and come as a set of 10 pieces.This saucepan set will be a wonderful addition to any doll's house kitchen.The set has been created using plastic.Approximate width of the largest saucepan excluding the handle 22mm = 7/8 inches...

1:12 Scale - Metal - width 50mm - height 100mm = 2 x 4 inches..

1:12 Scale Miniature - Metal with fabric bag - width 50mm - depth 5mm height 85mm = 2 x 2 x 3.3/8 inches..

1:12 Scale - Metal - Pack of 1 - Length 25mm - 1 inches - Length of pin that goes into the door 4mm..

1:12 Scale - Metal - Height 20mm = 3/4 inches..

1:12 Scale - Metal - Pack of 2 - Length 16mm - 5/8 inches - Almost a flat back..

1:12 Scale - Metal - Height 25mm = 1 inch..

1:12 Scale - Metal - Height 22mm - 7/8 inches the diameter of the ball - approx 1cm/10mm..

1:12 Scale - Metal - Door opens - Tray pulls out - length 50mm - height 40mm = 2 inches x 1.1/2 inches..

2 Wired 1:12 scale 12v wired bulb holders with bulbs..

1:12 Scale - Plastic - Height without lids 13mm = 1/2 inch - Come filled as pictured..

1:12 Scale - JBM Miniature - Beautifully carved detail - length 125mm depth 45mm height 140mm = 4.7/8 x 1.3/4 x 5.1/2 inches..

1:12 Scale - Plastic - Height of candlestick 20mm = 3/4 inch - Comes with the candles..

1:12 Scale - Wooden - Trowel, brushes and pots are not removable - Approximate length 52mm = 2 inches..

1:12 Scale - Wooden - Vinyl Upholstery - Length 90mm - 3.1/2 inches..