All Products

1:12 Scale - Hand Made in Britain by Mrs Denton at Muffin Lodge - Length 60mm = 2.5/16 inches..

1:12 Scale - Height 105mm - 4.1/8" - To Replace the battery unscrew the base of lamp. Battery CR1632 can be bought at Melody Jane Dolls Houses  ..

1:12 Scale - Wooden - Approximate width 77mm - height 60mm = 3 x 2.3/8 inches..

Cir- Kit Junction Splice..

10 pairs of magnetic discs approximately 1cm diameter x 1mm thick - to part the magnets please slide apart. These magnetic discs can be used to hold battery lights, pictures or other miniatures in place. Glue one magnet to the wall or ceiling where you wish to attach your light or picture and glue t..

1:12 Scale - Paper - Length 44cm Height 30.5cm = 17.3/8 x 12 inches..

1:12 Scale - Paper - Length 44cm Height 30.5cm = 17.3/8 x 12 inches..

1:12 Scale - Wooden - Approximate width 52mm height 60mm = 2 x 2.3/8 inches..

1:12 Scale - Fabric - 46mm - 220mm = 1.3/4 x 8.5/8 inches..

1:12 Scale - Fabric - 46mm - 220mm = 1.3/4 x 8.5/8 inches..

Miniature frames to put your own dolls house pictures or painting in. �Made from resin to 1:12 scale. �Large one 65mm x 50mm = 2.55 inches - 1.96 inches..

1:12 Scale - Woven fabric - Approximate width 50mm Length 485mm = 2 x 19 inches..

1:12 Scale - Woven fabric - Approximate width 50mm Length 485mm = 2 x 19 inches..

1:12 Scale - Woven fabric - Approximate width 50mm Length 485mm = 2 x 19 inches..

1:12 Scale - Woven fabric - Approximate width 50mm Length 485mm = 2 x 19 inches..

1:12 Scale - Woven fabric - Approximate width 50mm Length 485mm = 2 x 19 inches..

1:12 Scale - Pack of 4 bulb holders & bulbs..

Miniature dollhouse sewing room accessory - 1:12 Scale - Paper, thimble is metal - longest pack 15mm - 9/16 inches..

1:12 Scale - Wooden - To be used with a 12 volt transformer - Approximate height 45mm = 1.3/4 inches..

1:12 Scale - Fabric - 46mm - 220mm = 1.3/4 x 8.5/8 inches..

1:12 Scale - Fabric - 46mm - 220mm = 1.3/4 x 8.5/8 inches..

1:12 Scale - Approximate height of Rooster 12mm = 1/2 inch..

1:12 Scale - Approximate height 18mm = 11/16 inch..

1:12 Scale - Approximate length 15mm = 5/8 inch..

1:12 Scale - Plastic - To be used with a 12 volt transformer - Approximate width 45mm = 1.3/4 inches..

1:12 Scale - Hand made so size and colour will vary a little, approximate width 40mm = 1.9/16 inches..

1:12 Scale - Hand made so size and colour will vary a little, approximate width 22mm = 7/8 inches..

1:12 Scale - Approximate Width 50mm Height not including chain 50mm = 2 x 2 inches - 12V Comes with standard white plug and white wires approximate length 600mm = 23.1/2 inches - Easy replaceable screw in bulbs - Can be bought at Melody Jane Dolls Houses..

1:12 Scale - approximate width 45mm = 1.3/4 inches..