All Products

1:12 Scale – Wooden with fabric upholstery - JBM Miniature        Approximate Width 60mm Depth 57mm Height 115mm = 2.1/4 x 2.3/8 x 4.1/2 inchesHigh back chair with open arms and straight carved finials.  The flat arm rests are supported by fine turne..

1:12 Scale - Resin - Width 63mm - Height 115mm = 2.1/2 inches x 4.1/2 inches..

1:12 Scale - Wooden - Length 91mm - Height 76mm = 3.9/16 inches x 3 inches..

1:12 Scale - Metal - Bar Height 88mm - Width 185mm = 3.7/16 inches x 7.1/4 inches - Stool Height 70mm = 2.3/4 inches..

1:12 Scale - Wooden with fabric upholstery - Width 60mm – height 100mm = 2.3/8 inches x 4 inches..

1:12 Scale - Wooden width 45mm - height 153mm = 1.3/4 inches x 6 inches..

1:12 Scale - Wooden - Base length 100mm = 4 inches - Drawers open..

1:12 Scale - Fabric - Length of top 40mm - 1.9/16 inches..

  1:12 Scale - This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery.   Batteries CR1632 are not included but can be bought from Melody Jane Dolls Houses   Width of shade 25mm - 1 inches   ..

1:12 Scale - Width of shade 25mm - 1" - Battery not included   Comes with an adhesive backed magnetic disc to be stuck to a wall, ceiling, table or where ever you want to position your light.   The lamp then snaps on to the magnet.   When you need to switch off or on, remove the lamp from the magnet..

1:12 Scale - Wooden frame - 90mm = 3.1/2 inches..

1:12 Scale - Resin - Approximate Length 17mm = 1/16 inches..

Resin Frame Canvas on Card Picture - width 75mm - height 65mm - 3 inches x 2.1/2 inches..

1:12 Scale - Metal - width 53mm - height 70mm = 2.1/16 inches x 2.3/4 inches..

1:12 Scale - British Made - Lead free pewter - Height 50mm = 2 inches..

Length 50cm - width 33.5cm - 19.5/8 inches x 13.1/8 inches..

1:12 Scale - Height 105mm - 4.1/8" - To Replace the battery unscrew the base of lamp. Battery CR1632 can be bought at Melody Jane Dolls Houses  ..

1:12 Scale - This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery.   Width of shade 25mm - 1"  Bright White   Comes with an adhesive backed magnetic disc to be stuck to a wall, ceiling, table or where ever you want to position your light.   The lamp then sn..

1:12 Scale - Height 37mm - 1.1/2 inches - This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery. Batteries CR1632 are not included but can be bought from Melody Jane Dolls Houses..

1:12 Scale - This fixture is fitted with a 12 volt screw in pea bulb To be used with a 12 volt transformer Approximate width 22mm = 7/8 inchSpare bulbs are available at Melody Jane Dolls Houses..

1:12 Scale - Fitted with a bi pin bulb - To be used with a 12 volt transformer - Height 35mm = 1.3/8 inches Replacement bulbs can be bought at Melody Jane Dolls Houses..

1:12 Scale - Paper - width 435mm - height 305mm = 17.1/8 inches x 12 inches..

1:12 Scale - Working doors - Wooden - With acrylic - Fits opening 5.1/16 inches wide x 7/9/16 inches high x 3/8 inches deep = 128mm x 193mm x 10mm..

Wooden - 1-12 Scale - Doors and drawers open - Unit containing oven length 152mm - depth 52mm - height 181mm = 6 x 2 x 7.1/8 inchesUnit containing sink length 201mm - depth 52mm - height 181mm = 8 x 2 x 7.1/8 inches - Island & Fridge..

1:12 Scale - Resin - width 132mm - depth 47mm - height 212mm = 5.3/16 inches x 1.7/8 inches x 8.3/4 inches..

1:12 Scale - Wooden - Pack of 2 - 34mm = 1.3/8 inches Long..

1:12 Scale - Wooden - width 127mm = 5 inches - height 89mm = 3.1/2 inches - Complete with 12 Volt 150ma. Spare bulbs and real wood logs..

1:12 Scale - Plastic - length 35mm = 1.3/8 inches..

1:12 Scale - Metal - width 7mm - 1/4 inches..