All Products

1:24 Scale - White metal - Approximate length of bath 55mm = 2.1/8 inches..

1:24 Scale - White metal - Approximate height 20mm = 3/4 inches..

1:24 Scale - White metal - Approximate length 47mm = 1.7/8 inches..

1:24 Scale - White metal - Approximate length 20mm = 3/4 inches..

1:12 Scale - Wooden - Approximate width 43mm - height 85mm = 1.5/8 inches x 3.1/4 inches..

1:12 Scale - Approximate height 55mm = 2.1/8 inchesButton/coin batteries can cause severe injuries or even death when swallowed. Keep batteries out of reach of children. If you suspect a child has swallowed or inserted a button/coin battery, seek medical attention immediately...

This light Changes Colour, red, green, pink, blue, white. 1:12 Scale - The next generation of LED lamps. This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery. The result is a range of Lamps with a pleasant warm glow, very similar to the normal Tungsten Fila..

1:18 Scale - Lundby's Modern Dolls House Garden Accessory - Hutch Height - 6.5cm = 2.9/16 inches The doll family's pets love playing and getting up to mischief. The two rabbits, the cat with its kitten and the dog with its puppy are obviously family members who love living together in the doll's hou..

1:12 Scale - Plastic - Wheels go round - Approximate width 20mm length 33mm height 20mm = 3/4 x 1.5/16 x 3/4 inches..

1:12 Scale - Plastic - Wheels go round - Approximate width 20mm length 33mm height 20mm = 3/4 x 1.5/16 x 3/4 inches..

1:12 Scale - Wooden - Fits opening approximately 65mm wide 128mm high 10mm deep = 2.9/16 x 5.1/16 x 3/8 inchesApproximate overall size 103mm wide 135mm high = 4.1/16 x 5.1/4 inches..

1:12 Scale - Metal - Designed by Jacqueline Ker Deiber - Approximate width 60mm height 135mm = 2.3/8 x 5.1/4 inches..

Approximate height of lamp 62mm =2.3/8 inchesComes with a magnetic disc to be stuck to a wall, ceiling, table or where ever you want to position your light.When you need to switch off or on, remove the lamp from the magnet flick the switch and replace on magnet.To Replace the battery unscrew the bas..

Approximate height of lamp 40mm = 1.9/16 inchesTo Replace the battery unscrew the base of lamp. Replacement batteries can be bought at Melody Jane Dolls Houses..

1:12 Scale - Brass - Pack of 20 - Approximately 4mm long..

1:12 Scale - Metal - 6 sets of key plate key & nails - Approximate length of key 15mm = 9/16 inches..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systemsApproximate height of lamp 62mm =2.3/8 inchesReplacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 38mm = 1.1/2 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 41mm = 1.5/8 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - Approximate height 45mm = 1.3/4 inches  This fixture is supplied with a 12 Volt bulb for use with a 12 volt system Spare screw in pea bulbs can be bought at Melody Jane Dolls Houses  ..

1:12 Scale - Approximate height 50mm = 2 inches  This fixture is supplied with a 12 Volt bulb for use with a 12 volt system Spare screw in candle bulbs can be bought at Melody Jane Dolls Houses..

1:12 Scale - Comes with a 12 Volt bulb to be used with a 12 volt system Approximate height 30mm = 1.3/16 inches Replacement screw in candle bulbs can be bought at Melody Jane Dolls Houses..

1:12 Scale - Approximate height 30mm - Length 10mm - Width 20mm = 1.3/16 x 3/8 x 3/4 inches - Comes with a 12 volt bulb, standard white plug and white wires approximate length 600mm = 23.1/2 inches -To be used with a 12 volt system -Easy replaceable screw in candle bulb -Spare bulbs can be bought at..

1:12 Scale - Wooden - 7 Piece Set - Approximate length of table 152mm = 6 inches..

1:12 Scale - Set of 8 - 4 trees 8cm high = 3.1/8 inches, 4 trees 5cm high = 2 inches..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 52mm = 2.1/8 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - JBM Miniature - Approximate width 80mm = 3.1/8 inches..

1:12 Scale - JBM Miniatures - Approximate height 135mm = 5.1/4 inches..