All Products

1:12 Scale - Plastic - Wheels go round - Approximate width 20mm length 33mm height 20mm = 3/4 x 1.5/16 x 3/4 inches..

1:12 Scale - Wooden - Fits opening approximately 65mm wide 128mm high 10mm deep = 2.9/16 x 5.1/16 x 3/8 inchesApproximate overall size 103mm wide 135mm high = 4.1/16 x 5.1/4 inches..

1:12 Scale - Metal - Designed by Jacqueline Ker Deiber - Approximate width 60mm height 135mm = 2.3/8 x 5.1/4 inches..

Approximate height of lamp 62mm =2.3/8 inchesComes with a magnetic disc to be stuck to a wall, ceiling, table or where ever you want to position your light.When you need to switch off or on, remove the lamp from the magnet flick the switch and replace on magnet.To Replace the battery unscrew the bas..

Approximate height of lamp 40mm = 1.9/16 inchesTo Replace the battery unscrew the base of lamp. Replacement batteries can be bought at Melody Jane Dolls Houses..

1:12 Scale - Brass - Pack of 20 - Approximately 4mm long..

1:12 Scale - Brass - Pack of 12 - Approximate width 2mm..

1:12 Scale - Metal - 6 sets of key plate key & nails - Approximate length of key 15mm = 9/16 inches..

1:12 Scale - Wooden - 5 Piece set - All drawers open - Bed approximate width 125mm - length 170mm - height 185mm = 5 x 6.3/4 x 7.1/4 inches..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systemsApproximate height of lamp 62mm =2.3/8 inchesReplacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 57mm =2.1/4 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 38mm = 1.1/2 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 41mm = 1.5/8 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - Approximate height 45mm = 1.3/4 inches  This fixture is supplied with a 12 Volt bulb for use with a 12 volt system Spare screw in pea bulbs can be bought at Melody Jane Dolls Houses  ..

1:12 Scale - Approximate height 50mm = 2 inches  This fixture is supplied with a 12 Volt bulb for use with a 12 volt system Spare screw in candle bulbs can be bought at Melody Jane Dolls Houses..

1:12 Scale - Comes with a 12v bulb to be used with a 12 volt system Approximate height 35mm = 1.3/8 inches Replacement screw in candle bulb can be bought at Melody Jane Dolls Houses..

1:12 Scale - Comes with a 12 Volt bulb to be used with a 12 volt system Approximate height 30mm = 1.3/16 inches Replacement screw in candle bulbs can be bought at Melody Jane Dolls Houses..

1:12 Scale - Approximate height 30mm - Length 10mm - Width 20mm = 1.3/16 x 3/8 x 3/4 inches - Comes with a 12 volt bulb, standard white plug and white wires approximate length 600mm = 23.1/2 inches -To be used with a 12 volt system -Easy replaceable screw in candle bulb -Spare bulbs can be bought at..

1:12 Scale - Approximate height 33mm = 1.1/4 inches  Comes with a 12 volt bulb, standard white plug and white wires approximate length 600mm = 23.1/2 inches  To be uses with a 12 volt system Easy replaceable screw in candle bulb Spare bulbs can be bought at Melody Jane Dolls Houses ..

1:12 Scale - Wooden - 7 Piece Set - Approximate length of table 152mm = 6 inches..

1:12 Scale - Set of 8 - 4 trees 8cm high = 3.1/8 inches, 4 trees 5cm high = 2 inches..

1:12 Scale - This fixture is fitted with a 12 volt bulb - Designed to be used with 12 volt systems Approximate height of lamp 52mm = 2.1/8 inches Replacement can be bought from Melody Jane Dolls Houses..

1:12 Scale - JBM Miniatures - Approximate length 90mm = 3.1/2 inches..

1:12 Scale - JBM Miniature - Approximate width 80mm = 3.1/8 inches..

1:12 Scale - JBM Miniatures - Approximate height 135mm = 5.1/4 inches..

1:18 Scale - Lundby - Cat Family - Height of Tallest Cat 2.5cm = 1 inch There's nothing as cute as a little cat so just imagine how cute she'd be in miniature!  The adorable Lundby cat family includes three cats and two tiny kittens, and one of them has got hold of a ball!  There's a big, comfy bask..

1:12 Scale - JBM Miniatures - Approximate length 112mm = 4.3/8 inches..

1:12 Scale - JBM Miniatures - Approximate height 90mm = 3.1/2 inches The chair has been designed with an adjustable writing table fitted to the arm on the right side of the chair.  The sides of the chair are faux cane and the arms have small arm rests upholstered in a soft brown leather.  The writin..

1:12 Scale - JBM Miniatures - Approximate length 95mm = 3.3/4 inches..